FSJ BUILDUP STAGE III

those are stock springs with an adda leaf in so i can take the add a leaf out to lose two inches that should do the trick.
 
attempted to put my tcase in sunday only to find out i need to notch out the floor above and i have to notch the crossmember out tremendously to get a drive shaft thru . im wondering if you can run a double cardan on a 205 because that would help the clearance issues.
 
i think i have one for a 203
 
finally finished my 205, did the whole twin stick thing to it, neat stuff. cant wait to actually make my doubler.
You mentioned this back on 7/8. What were you planning to use as your doubler? I have a Dana 20, needs some tlc, but it worked before I pulled it from my CJ.
T.J.
 
that sir... is a sick jeep:Rockon:

thank ya thank ya all it lacks is being finished!

finally finished my 205, did the whole twin stick thing to it, neat stuff. cant wait to actually make my doubler.
You mentioned this back on 7/8. What were you planning to use as your doubler? I have a Dana 20, needs some tlc, but it worked before I pulled it from my CJ.
T.J.

im using a 203 i already have. its been pulled apart ready to clean up and get the kit im just missing the 1000 for the doubler kit.

im gonna run just the 205 till after i rebuild and drop in my 401 then ill do the doubler
 
ive got just as many haters as i do fans.

todd, plan on goin to harlan fall crawl, my shits gotta be ready by october
 
I'm going... you can ride on that spare tire I have of yours!! I know your junk won't be able to drive all the way over there- even if you sell that other sled to fix the Heep!!! :flipoff2:

Hey- All BS aside- I may have a line on a pair of 42" TSLs for spares. You want to buy one if I get them?? They are 16s, but they will come on standard 16x10 steel wheels. :bling:
 
so funny john!!!

todd i def do want one so put me down for it.

ill never finish it unless i sell my f350 so get your lil gay dodge buddy to tow your shit again to harlan. you can tow mine and now jamie can tow his own since he's got a 3/4 ton with bling dodge wheels and michelin tires
 
FSJ

Hey metalhead...don't worry too much about Todd...when he's done hacking up that dodge..he'll wish he had a FSJ too!!
i say go with the red...everybody needs a little bling in their life...Todd's just jealous...
brian
 
Hey metalhead...don't worry too much about Todd...when he's done hacking up that dodge..he'll wish he had a FSJ too!!
i say go with the red...everybody needs a little bling in their life...Todd's just jealous...
brian


red would look good and well todd is just todd
 
red would look good and well todd is just todd

And proud of it!!:beer:


Paint it red- then you can ride all the easy trails like a few other red jeeps I know!! :lol:

And don't diss Jamie's FREE chrome Dodge wheels and FREE 50k mile michellins. That Chebbie he's got is a hell of alot safer than the Ferd Terd you drive!!

By the way- 42" tire- good tread w/ homemade beadlock wheel = $150 call me to work it out- and - no- I am not the First Bank of Todd!!
 
And proud of it!!:beer:
Paint it red- then you can ride all the easy trails like a few other red jeeps I know!! :lol:
And don't diss Jamie's FREE chrome Dodge wheels and FREE 50k mile michellins. That Chebbie he's got is a hell of alot safer than the Ferd Terd you drive!!
By the way- 42" tire- good tread w/ homemade beadlock wheel = $150 call me to work it out- and - no- I am not the First Bank of Todd!!


thats why my ford is goin bye bye. i need me a good 2500 dodge with a cummins in it.

i def want that spare and i dont want to borrow any money todd. just give me the money
 
got my gears tonite from butch @ fourwheelsuplly.net and got started on cutting up my crossmember to make the 205 work. its all coming together. sort of
 
finally got some progress sort of.

got a tubing bender delivered saturday, along with 37' of tubing and i went out and bought a chop saw at sears and picked up a can of paint to try out on the jeep.

i bent up the tubes for my crossmember and bent up two tubes for the rollcage, get to the rest over the long weekend and finally get my tcase up in the jeep.

sourapplegreen1.jpg


rollcagebuildup1.jpg


rollcagebuildup2.jpg


rollcagebuildup3.jpg


rollcagebuildup4.jpg
 
im also looking for some sheetmetal, something like 18-22g for some innerfenders if anybody is in the know
 
Back
Top