advice on turbo charging a 22r on propane

[Black Bear]

I used 1.5 .120 wall just cause that's what i had. I'm not sure I'd trust PVC. 1.5 exhaust tubing would be fine. If you could flare the end or weld a ridge on it. If not the tube can and will just slip off the tube and it really sucks when that happens

 

[ORV design and fab]

I like the exhaust tubing idea. Get it bent to what ever design you need and mount it like an exhaust system.

 

[rokntoy]

came across this thread while researching a turbo for my 22r! Do you still have this?

 

[ORV design and fab]

came across this thread while researching a turbo for my 22r! Do you still have this?

I do. I love it. It dynoed 175hp on 37s.

 

[ORV design and fab]

after I did the turbo setup I had a problem with over fueling. I run out of propane after half a day riding. I called cary and he sent me out a mixer that was setup for turbo and extra hp. I run 11-13 lbs of boost. Its a great setup. I have since went to a auto trans

 

[paradisePWoffrd]

after I did the turbo setup I had a problem with over fueling. I run out of propane after half a day riding. I called cary and he sent me out a mixer that was setup for turbo and extra hp. I run 11-13 lbs of boost. Its a great setup. I have since went to a auto trans

what mixer did you goto? I am assuming it is still draw-thru? how long does it last on propane now?

 

[ORV design and fab]

It was got propane's new mixer is all. I spoke with cary and he sent me one. My air fuel ratios are much better and a tank will last more than a full day of wheeling.

 

[chappyfj60]

It was got propane's new mixer is all. I spoke with cary and he sent me one. My air fuel ratios are much better and a tank will last more than a full day of wheeling.

so do you have anymore pics or the build up of the propane,

 

[ORV design and fab]

so do you have anymore pics or the build up of the propane,

Project dirt dobber