Driving a 1988 4 runner...

Milk Man

New Member
Joined
May 29, 2006
Location
Stedman,NC
I am trying to get uesd to it but it pulls and has some play in the stering. Do I need to replace the bushings. Its almost like driving my 79 cj7:driver: . Any suggestions, stering box or shocks..
 
balljoints are gone, wheelbearings next, tie rods, drag link, and and idler arm all need replacing. Been there, done it.
 
the stock push-pull steering pretty much sucks. Check to see if all the draglink is still tight. There is a spring and ball on each side that locks the rod in place.

My advice....go to high steer as soon as possible. It will drive 100% on and off the trail.

Seth
 
Back
Top