3/4 and 1" fuel hose ?

Discussion in 'General Tech' started by 89wrangler, Jan 16, 2020.

  1. 89wrangler

    89wrangler Not a new member

    Joined:
    Oct 22, 2005
    Location:
    Bostic,NC
    Anyone know a source to purchase 3/4 and 1" ID fuel hose? This if for the gas tank fuel inlet and vent hose? it appears O'Reillys may have 3/4, but the 1" seems to be elusive. Thanks
     
  2. NickMaul

    NickMaul Well-Known Member

    Joined:
    Jul 4, 2009
    Location:
    Norfolk, VA
    McMaster err thang

    [​IMG]


    Sent from my iPhone using Tapatalk
     
    tknopp and JSJJ388 like this.
  3. Bebop

    Bebop Active Member

    Joined:
    Nov 16, 2019
    Location:
    NC
    AN16 hose is 1" ID, correct ?
     
  4. Chris_Keziah

    Chris_Keziah Joe Dirt @ Rev Limit Fab

    Joined:
    Dec 1, 2010
    Location:
    Winston-Salem
    Yes

    I doubt you'll be able to find it local to you but if you have a hydraulic hose place I'd check there. If not I'd order it from Summit.
     
  5. a_kelley

    a_kelley mechanical fixer

    Joined:
    Jan 26, 2010
    Location:
    Rutherfordton
    Napa should have it. At least my local store does. That size will be fuel vapor hose. Gates makes 3/4". Saw 30r7. I have a 2 foot piece of 3/4" here.
     
  6. 89wrangler

    89wrangler Not a new member

    Joined:
    Oct 22, 2005
    Location:
    Bostic,NC
    Thanks Guys! Did not even think about Mcmaster. Had just what I needed. Thanks
     
  7. doc

    doc Well-Known Member

    Joined:
    Mar 20, 2005
    Location:
    Southmont

Share This Page