Rollcage tubing disconnect junctions

[RatLabGuy]

The cage spreader bar behind the seats in my 4Runner make getting into the back seat a real pain in the butt.
I've come to accept that it isn't going to be used for any serious 4wheeling or racing in the near future.
I'd like to cut the ends of the bar just inside the interior and add fittings so it can be replaced if needed.
Any suggestions?

 

[shawn]

1-3/4" Interlocking Tube Coupling

If you are building a cage or any other type of tube work that you need to be removable our interlocking tube couplings are a great option. These tube couplings will work great for roll cages, removable engine cages, exo cages or any other tube work that you might need to be able to remove on...

barnes4wd.com

 

[RatLabGuy]

1-3/4" Interlocking Tube Coupling

If you are building a cage or any other type of tube work that you need to be removable our interlocking tube couplings are a great option. These tube couplings will work great for roll cages, removable engine cages, exo cages or any other tube work that you might need to be able to remove on...

barnes4wd.com

That's perfect!

.... Now I just need to find in 1.5"

 

[RatLabGuy]

For future reference there are lots of options here

Tubing Connectors - Kartek Off-Road

Tubing Connectors for offroad racing in the King of the Hammers, New Zealand Taupo 1000, Dakar Rally, Tatts Finke Desert Race, Score International Baja 500 or Baja 1000, Mint 400, Vegas to Reno, Silk Way Rally, Crandon International, East African Safari Rally, Rallye Aicha des Gazelles, Formula...

www.kartek.com

As luck would have it I don't know whether it's 0.095 or 0.120 wall so I gutill have to cut and measure first

 

[tobaccoroad4wd]

If you find the SXS ones, they have both bolts on the same side. Just makes it easier to get bolts out in the future. I’ll find you a link.

For future reference there are lots of options here

Tubing Connectors - Kartek Off-Road

Tubing Connectors for offroad racing in the King of the Hammers, New Zealand Taupo 1000, Dakar Rally, Tatts Finke Desert Race, Score International Baja 500 or Baja 1000, Mint 400, Vegas to Reno, Silk Way Rally, Crandon International, East African Safari Rally, Rallye Aicha des Gazelles, Formula...

www.kartek.com

As luck would have it I don't know whether it's 0.095 or 0.120 wall so I gutill have to cut and measure first

Edit for link-

Flat Tubing Disconnect

Our off road tubing disconnects work great to protect your engine and other vital component on your rig. These flat tubing disconnects work great on bumpers, roll cages, and removable racks. Our offroad tubing disconnects work great on about any off-road vehicle including your Jeep, tube buggy...

r1industriesoffroad.com

I’ve never used that company before, but I have a similar pair in the shop now.

 

[strange1]

I like the idea of having both bolts on the same side for convenience, but the flat surface on some of those places 100% of any stress on just the bolts.