Frankenstein Street Queen (a.k.a. SpeedBump)

Painted the SYE cover and Yoke.

021a81146ea3eaacee340b169e8d4de6.jpg
 
Rebuild 90% complete haha. I have reservations about the chain. But gunna run it. I have this other case to fall back on if it explodes. Haha.

Hopefully did it right :apprehensive:

093f3690fcc24e1b07d3c11cd8b59617.jpg


2b548d117c6df521e2beb5c91fe871a0.jpg


ac8dcc5b16700a24a87e6b56f424a903.jpg


c7480d421676387588a41e6fa89fc5f0.jpg
 
Can't have a 4x4 without a front axle.
I wrapped up your front HP44 today. 4.88 gears, all new bearings and seals too.
Time to open up the ol' pinion depth gauge set
IMG_20161107_163619765.jpg

I came up with 0.018" (with baffle and slinger accounted for)
IMG_20161107_163426651.jpg

Someone at Dana used 0.020" back in 1978, so I must be close
IMG_20161107_163831713.jpg

Set backlash to spec for initial pattern check
IMG_20161107_170356271.jpg

About as good as it'll get given the gears you supplied me with. :)
IMG_20161107_174633182.jpg

Buttoned up and ready to pick up
IMG_20161107_190440797.jpg
 
Picked up the 5.3 engine today got it onto the engine stand man this is one dirty engine for only 78,000 miles it's from a Tahoe but definitely has the truck intake. very excited can't wait to start tearing this sucker apart and cleaning it and painting it

489e6e3e54cb830b3b665f22b1672e62.jpg


0db10a37de0bd365094880f70390241b.jpg


30bd7c60b022b10d222c4ab1244d796e.jpg


14049515441ae9a7460391c615f501af.jpg


fd37936649fcaf775f21dc7bc3ceb5a0.jpg


bb2ebc4cfd6c9ab4e56fc13967102fb6.jpg
 
Got to squeeze in some jeep time today! Not much. Just some painting. I need to paint the frame one more time and weld on a plate to fix the front body mount. Once i do that, i can toss the axles under it and move it forward! Gotta call up barnes4wd and drive over and pick up the ubolts and spring plates. Waiting on their email, as i need a custom plate for the d55 cast perch for the ubolt flip. Cleaned and painted up the Lakewood bellhousing! First coat, and i think i can get away with three only. Its stock red underneath so if it scratches no issue. I just wanted to freshen it up a bit. I cleaned up the t/o fork and shot a first coat on it as well. Went ahead and cleaned the camaro mc and shot it with a flat paint. Not sure if going to paint the same black or leave it. Dunno. Maybe go pink? lol. Yanked off the AX15 oem crossmember mount - hope to find a jeeper in need with some bones to spare! haha. gotta fund my bankrupt arse somehow. And here is the shot of the first coat on the transmission. I pulled the t/o sleeve cover and seals/bearings look in excellent condition. I am a little bit worried about the shaft play - got some posts made about it, will see what the gurus have to say.
 

Attachments

  • 15129994_1679450388963071_1848216168_n.jpg
    15129994_1679450388963071_1848216168_n.jpg
    40.2 KB · Views: 352
  • 15102239_1679450382296405_1740831943_o.jpg
    15102239_1679450382296405_1740831943_o.jpg
    188.3 KB · Views: 371
  • 15153112_1679450392296404_1703841712_o.jpg
    15153112_1679450392296404_1703841712_o.jpg
    184.2 KB · Views: 357
  • 15139706_1679450398963070_1810705688_n.jpg
    15139706_1679450398963070_1810705688_n.jpg
    50.3 KB · Views: 362
  • 15139509_1679450408963069_1915245232_n.jpg
    15139509_1679450408963069_1915245232_n.jpg
    63.3 KB · Views: 367
  • 15058737_1679450428963067_1182135280_n.jpg
    15058737_1679450428963067_1182135280_n.jpg
    47.2 KB · Views: 362
  • 15134138_1679450442296399_1249703435_o.jpg
    15134138_1679450442296399_1249703435_o.jpg
    178.8 KB · Views: 355
Got the old trans and Tcase pulled today!!! Getting ready to yank the body. Super stoked, but winter is coming fast

The internal slave is in super good condition. If it works on ax5 and AX15 trans then hopefully can help someone out for a few bones

The clutch is in super great condition. So good news on salability.

41995416f202c7919031511b308eb75a.jpg


9e1821269147b8f2e8777e5db7a7442c.jpg
 
Has your motivation been as dismal as mine? o_O
 
Has your motivation been as dismal as mine? o_O

Yeah havent seen posts from you, slacker. lol. It sure has man. Ive been slacking. My next step is to walk this frame out to driveway area and set on the stands, pick up the ubolt kits from barnes4wd, put the axles under it, assemble axles, and then move quickly with motor install, steering box, and swapping the body over. Not alot to do but just big stuff. right now the honest hold up is only having two hands, and i promised to clean/paint the motor with my brother when he comes to visit mid Dec.
 
Any reason this was on page 2 of the build thread section?
 
Any reason this was on page 2 of the build thread section?

because its cold and i got no garage and cant do nothin. frame is read to set on axles. steering kit ready to install. ready to clean and paint engine. a hairs breath from being ready to transfer body, but.... brrrrrr
 
because its cold and i got no garage and cant do nothin. frame is read to set on axles. steering kit ready to install. ready to clean and paint engine. a hairs breath from being ready to transfer body, but.... brrrrrr
Sack up it was 50 something today. I was fishing and didn't get cold lol

Sent from my XT1254 using Tapatalk
 
Sack up it was 50 something today. I was fishing and didn't get cold lol

Sent from my XT1254 using Tapatalk

i know it pissed me off. business trip yesterday. all day while driving i was looking at the temperature and seething lol
 
im itching to get back to this build yall!!! is it too much to pray for a skipped winter this year?
 
Took advantage of some warm days here and with the help of some friends got the engine tore down and broken exhaust manifold bolts removed from the head. Excited to get cleaning and painting!

5be2aee35ff456010fc8ce782972d580.jpg


e2c673ea1e84c40bf24ecc2d14f55ba2.jpg


0a064579f27eee4783d8ddc50a2bb5c2.jpg


c78da046578dfbeb6e261ce5048032db.jpg
 
So it's not just me then. I wonder sometimes if those bolts are preset to break at 40k miles like clockwork.
 
So it's not just me then. I wonder sometimes if those bolts are preset to break at 40k miles like clockwork.

Idk. This engine is 70k. The rear bolts are factory broke off so I've been told. But the driver side I had two bolts snap clean off. Most of the bolts I had to use a impact to get off. Welding on washers and nuts went really smooth and came out clean
 
Cleaned up the other head and other side of block. Took a stab at the timing chain cover. Hard to get everything with the main pulley in the way. Gunna go buy a case of brake cleaner and just try and get every bit of sludge of then paint and let it go. Time to get this thing installed! Lmao. Taking too long cleaning.

Oh and painted the valley cover!

Gunna need to replace that gasket and the water pump gaskets. Want to open it up and verify it's still good.

0876109f5abf62491c42a3c79eae8f10.jpg


4e3f568fb54267ca1daabed23e05e02b.jpg


bf51148a83d847e2569ad00d7af48aea.jpg


dca5d9eaf691a329629caa332271917e.jpg


b8b899f9f6077062d8a3f16592617a05.jpg


35fa2606a0ba6dc85b3a14a8b1c5cf2f.jpg


498f5384bc70801e1b25bca4ce9b2d05.jpg
 
Last edited:
Did a final degreasing and then primed the block. Need to tape off the head and prime the head next. Then time to paint!!!!

Decided not to go bare metal heads. The aluminum was just too grimed up and I'm tired of wasting precious time on anal aesthetics. Haha.

Exciting stuff

5a20f545831e23f8c4e27c9d8ce42169.jpg


e1bc1b5d61273dc273c6f8a6b6ac8bd5.jpg


e28a0c5d4444fb47cdf6dde0d44f5d23.jpg


758f2b4caf1d1fb1871b819a35d39cfe.jpg
 
Finished priming one of the heads. One more to go then final paint!!!

0d7373ea833a00fbd17b61a741de872d.jpg


caff56ba946811d755143941b8d31c09.jpg
 
Back
Top