JK & JKU Drive Shafts 1310 & 1350

Oliver's

Oliver's

Drive Line & Gear
Joined
Jul 16, 2005
Location
707 E. 12 1/2 St. Winston Salem NC 27101
Get rid of those crappy stock JK front and rear shafts! If you have any lift at all, they are a time bomb!
ai30.photobucket.com_albums_c323_DLWhitley1_th_006_6.jpgai30.photobucket.com_albums_c323_DLWhitley1_th_008_6.jpg

We have conversion yokes to allow you to run a traditional style 1310 & 1350 CV drive shafts. These shafts are .120 wall and we can upgrade them to .188 or .250 wall for a small up-charge.

You get (1) pinion flange, (1) CV yoke (T-case side) a 1310 CV shaft, (1) set of CV Bolts all for 399.99 Front or Rear Shaft 2dr. and 424.99 for a rear 4dr. Application. (JK 07-11)

Call about 1350 JK shafts.

1310 shafts come with greasable Spicer Joints and centering kit. Non-greasables can be added for a small upcharge per joint.

This is for a front and/or rear application JK 2 and 4 door 2007-2011. If you have a 12 and up some basic measurements may be required to order. Just give us a call and we can walk you through it.

ai30.photobucket.com_albums_c323_DLWhitley1_th_002_16.jpg
ai30.photobucket.com_albums_c323_DLWhitley1_th_005_11.jpg

We are glad to ship anywhere.

Call and order your replacement today!

336-724-1021

Thanks!


Dave
 
Last edited:
After researching our parts, 1350 shafts are now also available.

Thx!


Dave
 
I've been asked by a few about flanges for the 1350 shafts. We can use a flange, but they're a little more expense than the CV yokes, with little to no advantages, IMHO. Expect a 20-30 dollar upgrade charge.

Thx!

Dave
 
TTT
 
Getting good feedback from these! Replace that crappy stock shaft with some beef!
 
Bump
 
Bump for an absolute necessity for the JK wheel'n crowd.
 
TTT
 
Last edited:
Thanks!
 
In stock and ready to ship.
 
bump for a great vendor!

might have to get one of these for Sheri's jku sometime soon
 
Bump and Thanks for the business!
 
Thanks!
 
Thanks!
 
T-shirts are on the way.
 
Thanks!
 
lol yes it does!
 
Back
Top