Jeep/Dodge V8 needed

[benXJ]

Looking for a stock, running 304 or 360 for a project. Carb'd prefered. Don't need EFI. so 1974-1991 model years.

I'll take the entire car or just the engine.

Thanks!

 

[792.5cj5]

Ive got build dodge stroker 408 I've invested.
Chris

336.971..089six

 

[benXJ]

Thanks...thats probably a bit to much for my needs

thinking more of a cheap stock 304/360 for a truck project that will see 50 mph max and 100 miles a year. It just needs to move and not smoke too much.

 

[marty79]

I've got a SBC 350?? if that helps for cheap...ran fine, customer wanted a new motor so now I have this one. It's from a 77 Vette according to the block numbers

 

[benXJ]

Thanks. I have a 360/t18/dana20 assembly already.

But the motor is unknown and looks suspect.

Was hoping to find a better/running engine and just swap it out. I don't have much time to work on an old tired motor of unknown health

 

[LT1JEEP]

I have a few but it is a bit of a drive to get here.

 

[benXJ]

thanks......that is a haul. still looking locally

 

[tobaccoroad4wd]

@Mrxdieselx has a 5.2 in a ZJ obviously not carbureted but it’s available.

 

[Mrxdieselx]

@Mrxdieselx has a 5.2 in a ZJ obviously not carbureted but it’s available.

I do have a complete 94 zj with 5.2 only 107000 miles but it is fuel injected. If interested let me know

 

[benXJ]

Thanks.

I have a 360/T18/D20 out of a Jtruck now. The 360 is beat.

I want to just throw a new 304/360 in its place...as my first choice