Stock Replacement Jeep Shock Bracket!

[Dan Fredrickson]

These are just what they look like, stock replacement shock brackets, but a little bit more. All shock brackets are targets just waiting to be hit. Jeep brackets maybe more than others! These are no different in that way but if you do not have the time or skills to move your shocks higher these are the best solution. Our shock brackets are all 1/4" thick where the stock brackets are only half as thick. The net result is that ours can take a hit, not forever but a whole lot longer than the stock brackets!

This set is designed with a 10 degree angle to position your shocks exactly the same as stock replacement and made to fit the 3.25" tube diameter of the 8.8 but can be used for any tube diameter from 3"-3.5" with some minor tuning.

They are sold in pairs and should be welded on by a competent welder with the correct equipment.

 

[Dan Fredrickson]

Useful for lots of applications besides jeeps!

 

[Dan Fredrickson]

Replace the wimpy, low-hanging brackets with these beasts!

 

[Dan Fredrickson]

If you've joined the rather large club of jeep owners that have ripped off shock mounts, then you'll understand why these are a necessity!

 

[Dan Fredrickson]

Make it strong BEFORE you go out there and tear it off!

 

[Dan Fredrickson]

Great for more than just Jeeps too....

 

[Dan Fredrickson]

Rocks with be shaking in their boots when the see these coming!

 

[Dan Fredrickson]

These don't mind bumpin knucks with a rock or twelve.

 

[Dan Fredrickson]

Dings and scratches are merit badges for our brackets.

 

[Dan Fredrickson]

Not just for Jeeps...

 

[Dan Fredrickson]

If you've ripped one off, you know this is the one that will never let you down.

 

[Dan Fredrickson]

If you haven't had the joyous experience yet, May I suggest beefing up ahead of time to avoid the trail travesty ;-)

 

[Dan Fredrickson]

Abuse is inevitable... armor up!